From the first of April 2005 new legislation came into effect which means that all new boilers installed into a property must be condensing models. We specialise in boiler installation in Doncaster and are approved installers for Baxi potterton, Ideal, Worcester, Vokera. Doncaster Plumbing & Heating can provide a 10 year manufacturer’s warranty on any new Baxi potterton, Ideal, Worcester, Vokera boiler.

When it comes to boiler installation in Doncaster you have 3 options available:

Combination boiler installation in Doncaster – A combination boiler eliminates the need to store hot water so there’s no hot water cylinder within the airing cupboard. (A modest radiator can be installed within the airing cupboard to ensure that the airing cupboard can still be utilised.) The boiler is both a high efficiency water heater and central heating boiler. It runs ‘on demand’ and gives hot water to the heating system inside the house.

System boiler installation in Doncaster -System boilers are known as sealed system boilers mainly because the system is filled to approx. 1 bar pressure and sealed. They are connected to a hot water storage cylinder, usually installed within the airing cupboard. This type of boiler doesn’t need to have an expansion tank in the roof. They may be especially good for homes with greater than a single bathroom since the combination of boiler and hot water cylinder can provide hot water swiftly to various outlets simultaneously.

Open vent boiler installation in Doncaster – Open vent systems are commonly connected to two tanks within the loft. A smaller ‘feed and expansion tank’ supplies water for the boiler as well as the radiators. A larger domestic cold water storage tank gives the cold water feed to an open vent hot water cylinder. Though replacing the boiler and linking it to an existing open vent system is an option, a lot of people opt to take away the tanks in the loft and to set up a sealed system boiler or a ‘combi’.

Building Regulations
Gas Safe will be notified of new installations plus a certificate will be sent to you from regional building control.


How much does a boiler installation in Doncaster cost?

You will discover factors which make it easier to save money on boiler installation in Doncaster. Let us take a look at them:

The size of the house: The cost of installation is dependent upon this factor. If your property is a big property with numerous rooms to be heated, then it means that you ought to have a lot more quantity of radiators to be installed. This would increase the installation charges. In the event you have any form of future plans to expand or extend your building then it’s better to set up a boiler which can look after additional rooms.

Lack of infrastructure: In the event you don’t possess the pipe work or the radiators which are essential for the installation of the new boiler then this would also increase the boiler installation price.

Model of the boiler: Should you have opted for a model which costs more for the installation then also you’ll have to shell out more. The costs vary from 1 model to another. But here I’d like to add that it really is better to go for an high priced boiler since it will cost you less later on while maintaining it. Be sure that you select models of higher efficiency though they cost you a little more.

Please contact us for a quotation on boiler installation in Doncaster.